Home > News > Content
Rack Drive Considerations
- Dec 12, 2018 -

7points considerations for Rack drive

For the rack and pinion drive that starts the transmission and has the impact load, the following aspects should be noted:

1. It is best to design the displacement gear, and it is the negative displacement gear. The negative displacement will help to improve the bending strength of the root and help improve the impact resistance of the gear.

2,The selection of the bearing is recommended to select the sliding bearing. Do not choose the rolling bearing. The sliding bearing can have good impact resistance, but the sliding bearing should be well lubricated. 

3.The structure must have sufficient impact resistance and sufficient rigidity to ensure the running of the rack and pinion. 

4. Under the premise of the structure, the modulus m should be slightly larger, which is especially important for the start transmission with impact load.

5, the design speed is not too high

6. The quenching depth of the tooth surface is not too deep, generally 1/5m~1/10m (m: modulus). It is necessary to keep the core material with sufficient toughness to buffer the external impact load.

 

7.the heat treatment hardness of the tooth surface is not too hard, HRC30~HRC35 can be, the tooth surface is too hard, the wheel tooth crack will occur under the impact load

 

 

LUOYANG SOPHIA HEAVY MACHINERY CO.,LTD https://www.lyshmac.com/